| Carbon Fiber Materials |
 |
|
| ◇ Veil Mat |
| Kreca Veil Mat is made of longer chopped carbon fiber. In addition to reinforcement for plastics and cements, it is widely used as electromagnetic wave shielding material, electric wave absorbing material, and bearings, utilizing the high electrical conductivity and wear resistance properties of carbon fiber. |
|
|
 |
|
| ◇ K-Bolt |
| Kreca K-Bolts are made of Kureha Carbon Fiber C/C composite. K-Bolts assure reduced heat loss because of lower thermal conductivity than conventional molybdenum and graphite material bolts. K-Bolts are best suited for furnaces and other formed parts, because of its high strength and heat-resistance. |
|
|
 |
|
| ◇ Paper |
| Kreca paper is made from Kreca Chop. Two types of Kreca Paper are available: Carbon paper, whose binder is carbon/graphite, and Natural paper, whose binder is organic. |
|
|
 |
|
| ◇ K-Sheet |
| Kreca K-Sheet is a C/C composite sheet made of Kureha Carbon Fiber. It is used for heat insulation protection, plates in heat treatment and sintering furnaces, muffles, and other heat-resistant materials. |
|
|
 |
|
| ◇ Formed Heat Insulation |
| Kreca Formed Heat Insulation Kreca FR heat insulation is a rigidized fibrous carbon material made from Kreca Felt. It is available in flat plate, disc, cylinder and other forms. It is widely used as insulation in high-vacuum and inert atmosphere furnaces, such as heat treatment, sintering and silicon growing furnaces, operated at temperatures up to 3000℃. |
|
|
 |
|
| ◇ Felt |
| Kreca felt is a needle-puched felt made from Kreeca Tow. It is uniform in thickness, with a bulk density of 0.1g/cm3 and porosity of 95%. It is widely used as heat insulation such as for vacuum metallizing and vacuum sintering furnaces in which the temperature may rise beyond 1000 ℃. It is also suitable for corrsion-resistant filters, high heat-resistant protecive material, etc. |
|
|
 |
|
| ◇ Cloth |
| Kreca Cloth is a catrbon fiber fabric woven from Kreca Sliver/Yarn. It is used to form epoxy and phenolresin base laminates for use as wear and heat resistand materials, and also as surface reinforcement of Kreca FR heat insulation in high-tempera-ture furnaces. |
|
|
 |
|
| ◇ Chop |
| Kreca Chop is a milled or chopped fiber characterized by high strength and good resistance to wear, heat and corrosion. It is suitable for use invarious carbon-reinforced compos-ites, such as CFRC (carbon fiberreinforced concrete), CFRP (carbon fiber-renforced plastic) and CFRR (carbon fiber-reinforced rubber) It is also an important subsitute for asbestos in brake pads, linings and gaskets. |
|
|
 |
|
| ◇ Sliver/Yarn |
| Kreca Sliver/Yarn is produced by combing Kreca Tow and is available in two and three-strand thread. Its wear and corrosion resistance make it useful for gland (braided) packing. It is also used for anti-static purpose for artificial turf and as support material for heat insulators in high-temperature industrial furnaces. |
|
|
 |
|
| ◇ H-Board |
Specially-designed Carbon Tray for Sintering in Powder Metallurgy is developed by technology of controlling carbon structure. H-Board is being used in sintering process of iron-based material in powder metallurgy field.
|
|
|
